You must be logged in to rate content!
3 minute read
DOOR ARMRESTS Explorer 95-01
1. Remove 2 phiilips screws under armrest
2. Here's a front shot of these:
3. Pry off trim ring around interior door handle
4. Remove interior door skin: Using a pry off tool, carefully start to remove door panel by prying off door retainer clips at all edges of door (except top-there are no retainer clips at the top).
5. Take your time. :)
6. With door skin panel removed, remove 4 phillips screws which secure arm rest to door panel.
6. Remove armrest.
7. Install the RedlineGoods armrest cover - use contact cement to glue it over the stock armrest. Apply glue according to instructions on the glue can/bottle.
8. Align the leather cover nice and flat on the plastic part.
9. Reinstall the armrest reversing steps 1-7.
CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!
Useful tip
You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.
Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.
Powered by Froala Editor