1966 Mk1 cortina GT She Drives!

2 minute(s) of a 319 minute read

Just a small update:

I've been flatting the interior which is going well but I have found some thinner areas so I'll put more primer on but the majority of it looks good.

I've just primed the Engine bay for the second time - the 1st was a disaster! I ran out of primer a quarter of the way through and i hit a pocket of dust!

But I've just laid some primer on and it looks ok - I can start doing filler etc at least!

I've struggled to get in these tight areas - any ideas?

The more I look at the fan mounts I made the more I dislike them - I think I'll cut them off and use the ziptie mounts that go through the radiator

11-12-2018

I've been filling etc in the engine bay inbetween work and life.

And sanded again

I'm going to guide coat with the powder and go on with 120 to get the 80 grit marks out and see if there are any pin holes I've missed