You must be logged in to rate content!
5 minute(s) of a 87 minute read
2-6-2012
Hi Paul. I know you have been patiently waiting, we will finish this up in the next couple days.
Oil pan..
Another first of it's breed, built by SRE.. Steve had a block previously to do some templates with, but this is the first production block pan.. he would have to chime in if it was the first one period for the Tomahawk block. You note in these first pictures it's not completely welded, he tacked it up, and set it to me for a final test fit.
bungs for an oil heater and temp sender
External pickup -16 size
baffles were left out initially..
The thread in Steph's oil heater
Next thing to do was to check to see if a dipstick tube would clear the rotating assembly..
Yes, it will..
The finished pan
a better look at the heater..
The pickup
And installed
JW
Hi Paul. I know you have been patiently waiting, we will finish this up in the next couple days.
Oil pan..
Another first of it's breed, built by SRE.. Steve had a block previously to do some templates with, but this is the first production block pan.. he would have to chime in if it was the first one period for the Tomahawk block. You note in these first pictures it's not completely welded, he tacked it up, and set it to me for a final test fit.
bungs for an oil heater and temp sender
External pickup -16 size
baffles were left out initially..
The thread in Steph's oil heater
Next thing to do was to check to see if a dipstick tube would clear the rotating assembly..
Yes, it will..
The finished pan
a better look at the heater..
The pickup
And installed
JW
Awesome build, amazing you can get so many passes at 750 horsepower. Nice job!
Posted by stevegolf on 3/13/21 @ 3:45:39 PM