American Motors Xperimental full frame by Ron S

2 minute(s) of a 140 minute read

I first made inner rockers with plates and nuts welded to the inside, then welded sleeves into the perimeter frame for bolts to go through. I'm sure their is an easier less labor intensive way to do it. but it works pretty good. The only bad part is the cage swells out at the A and B pillars, so you have to spread the rockers a bit when taking the body on and off. It comes off surprisingly easy though.

Starting to work through the exhaust

4/1/2018

Wrapping up the exhaust, turning out pretty good