You must be logged in to rate content!
2 minute(s) of a 23 minute read
2-2-2014
It's been a while but I finally got some more work done on my car. Plans have changed some and that required me to move the fuse box in the passenger side kick panel. All the connections were done using solder and heat shrink (which is more than the factory used; I removed some factory crimp connectors in the wiring).
I extended only the wires that needed to be, carefully dissecting the various wire looms and freeing up wires that were long enough. It was very tedious work but should be well worth it in the end.
A Total of 6 Connectors to the FuseBox and I probably extended 40-50 wires, adding about 160 feet total of wire.
Before:
After:
How I got there:
