You must be logged in to rate content!
3 minute(s) of a 620 minute read
7-9-2011
I certainly appreciate the enthusiasm, I'll keep posting as the project moves forward.
Question...What does it mean to crawl a thread? I'm good at metalfabrication, but this computer stuff, I'm lacking at times.
I've got one more in the gas tank area. This one is showing the hand fabricated straps. For most viewing this, it doesn't mean much. For those looking for an alternative to the original... here we go.
7-10-2011
Thank you jeepinvader, I made it...I how cool is that.
Looking through some past photos I saw this one. reminds me of the times my dog killed something and was so proud that it posed by it to show it's accomplishment. Same here, this is the life of the ole' truck, "that's a good girl, hauling all that firewood". I just want to walk up and rub the top of it's fender.
Ok, let's get back to the build. Looking at this pic tells a couple stories. 1) The problem with this area on the lower part of the frame where the original rubber axle stopper was bolted to the frame. Once again, it captured and held all the corrosive crud. 2) Notice a piece of flat welded to the bottom of this area, years ago someone saw the weak area and welded that flat there to at least add some strength. (raising my hand). 3) look at the vertical frame, the rust has eaten it's way into the frame and some pinholes are starting to come through the other side. Very thin in this area. 4) Look to the left of the pic. Rust plays no favorites, it even ate it's way into the shock mounting bracket.
Ultimate classic truck right there
Posted by CCmyVW on 12/26/20 @ 4:17:42 PM