You must be logged in to rate content!
3 minute(s) of a 42 minute read
4-22-2013
I've never been a huge fan of stopping to take pictures, but once in a while I had to step back, smile, and say I have to photograph this.
So I ditched my friends going out to the bar to get a good nights sleep on Saturday to wake up at 7am for some breakfast. Went back to my Dad's house and got started! First thing to go on was the bumper. I remember from removing Kate's bumper that you have to get the winch on before you can install the bumper.
Next up was the rocker guards. Having the factory Rubicon sliders helped a lot. The two outer lower bolts lined up directly with the new mounts, so we just drilled out the set nut and used the two bolts to line the guard up.
Used a sharpie to mark the holes and... drilled Misty... Installed the gasket next. It fit really well.
End result:
Next up was to blind all of the a**holes
Lastly, take a poser pic!
At this point I was pretty hungry, so we stopped working for the day. Never got around to wiring the lights, and the ground bolt on the winch snapped, so I'll have to get another one. We were able to use some jumper cables to use the winch and reel the line in.
After lunch, I couldn't resist the urge to have some fun with my new toys!
That's where she sits now. I still have some stuff to button up in the next few days. Hopefully the weather cooperates!
Nice build!
Posted by Diggymart on 2/15/19 @ 3:10:44 PM