You must be logged in to rate content!
3 minute(s) of a 91 minute read
9-22-2014
Dads jeep is almost done! Hpefully both my jeep and my dads will be rock ready at the same time! Took some beauty shots of it today after putting it all back together.
9-27-2014
Today got the SYE in, now I need to take the driveshaft to the DS shop to get it retubed and cut to length. My new DS length is 29.5"
9-28-2014
WHAT A DAY! All I can say is that was one ***** of a SYE install. Spent the whole day today trying to diagnose why my transfer case would not shift into 2HI and into 4LO after the RR SYE. Turns out that I had to chop like 2mm off the fork shaft because the end was rubbing against the new RR tailhousing and not letting the fork connect the gears properly. Why can't things work out the first time...
10-4-2014
Finally got the rear driveshaft in and the 4WD hooked up so I went out to the this dirt patch in my town to get some poser shots and test out the suspension. Couldn't find a rock bigger then that so I couldn't get my coilover all the way collapsed. Also my rear tire rubs my coilover so Im going to need 2" spacers until I can get some beadlocks. Also stopped by 4wheelparts and picked up a set of RE quick discos that I will be hooking up to my stock swaybar up front so I can drive on the freeway without feeling like im about to die
This is sooooo bad ass!
Posted by bdub on 7/1/16 @ 9:42:01 AM