The Survivor Project-driveway frame swap/33's "build" by EricsGreen98Tj

3 minute(s) of a 57 minute read

I got the Jk turn signals in the grille today. Also I had to put an OEM battery tray in due to the height of the bracket that comes with the PS DeFenders. I also wired up the incab winch controller too.

I got 2 coats of black on the inside of the rockers and 3 coats on the outside but didnt have time to put them on for tomorrows ride. Just took too long for the coats of paint to dry...

Wheeling pics to follow!

3-10-2012

Had a DAM good day today! Only on the hook twice and one of those was cause my mufflerand tailpipe pulled off and jammed into the ground and hung me up on the exit from the hole(3ft bank on the exit). Had to winch out and then take a hack saw and cut the tailpipe in half to get everything off. The muffler was behind and underneath the axle...

At the end of the day while air'n up the tires and hooking the disco's back up:

Pics of the whole group and some of the terrain can be found in this thread:

http://www.jeepinwv.com/forum/viewtopic.php?f=7&t=28113

I'll post some more pics once I find em.

3-17-2012

Well i FINALLY got the rockers on today. Man it was a fight to the death too! Had one body mount strip out and another completely break off inside the tub.....

But after breaking out the welder and the grinder I at last prevailed....but I will admit to utmost respect for my adversary...

Anyway pic with the rear flare just stuck on/no bolts through it...

Oh and my old lady's Grand got hit in the butt by a Model A Ford. It pushed the bumper in a little and put a dent in the rear hatch but everyone was ok and thats all that really matters. If anyone happens to have a Dark Green hatch PM me.