bbuschs' stealth Rubicon build by bbusch

2 minute(s) of a 78 minute read

I can possibly get two on one side mounted but it's off by inches on the other side. The seat holes are 16" in width and front to rear it's either 9.25 or 10.25" (two options). The seat bracket is also a pain because there is a part of the plate that connects the two sliding brackets that cannot be removed, there are pins/bolts connecting but no way to remove them.

If you look close you can see the pins, they are round on the top of that plate (four of them).  

Any idea how to get that plate removed?

12-31-2012

Well I have this Uniden CB radio that I removed last year. Now that I have a conceal carry lock box in the location this previously resided I am looking for ideas where to mount. I am considering mounting it on the Rock Hard cage up top but really would like it more out of sight. The roll bar location would be clean but cuts down on sun exposure through the cage. Open to ideas.  


Here is the unit, Uniden PC68XL




Between the top roll bars forward is the potential mounting location