90 yj frame swap and build up by lovett86

3 minute(s) of a 84 minute read

made some progress lately, not alot , but some

filled in the tube and ground it flush

some more pics of the rear bracket, im going to drill threw the frame and sleve it 

getting it ready to drill

4-5-2015

Got a little more work done on the jeep this weekend, haven't been out in the garage much this winter, will have some pics up once I get some more work done again, gonna try and get out there at least once a week from now on, the wife may be getting her father's old Camero, its a 78 with a 350 auto in it, its been sitting the better part of 15 yrs in storage, so may be doing some work to it to get it on the road for summer, also just ordered some new turkey calls and some camo for the spring turkey hunt coming up

4-13-2015

rear spring bracket in place, still not fully welded and i still have to sleve it

i did get the passenger side spring mounts cut off and both of the engine mounts cut off, every thing is ground down and cleaned up

drivers side tacked in place until i get the passenger side done and make sure everything is in its proper place before final welding

i have a small shed on the back of the garage, were gonna tear it down and re build it, this is some of the wood and the door for it, all the wood came from my father in laws farm

free 1 ton chain hoist i was given from my father in law as well

this is an old hand operated well pump i just picked up too, it was actually made about 20 minutes from the town i live in now, its gonna go in our garden this summer