You must be logged in to rate content!
2 minute(s) of a 67 minute read
5-11-2014
Question...
I have a set of brake lines that will work except I need to drill out the block end to 5/16 it's currently a 3/8 block.
There appears to be plenty of material.
If it's iffy I will not drill, safety is important to us, please inform.
5-17-2014
Well I got my rear brake lines finished!
6-1-2014
Got the shocks in bil5165 from "kolak" jeep forum member. Super guy. And the fox bump cans up front. I got the greasable shackle bolts in and tight.
Next is to bolt the Trans in and break the cam in.
7-2-2014
Trans in.
Waiting on the sand blast guy to open his schedule.... Need to blast the tub and body parts.
8-27-2014
Yeah I've been doing some things here and there. I have more updates but haven't taken pics yet.
It has been real hot here
8-30-2014
swag off-road sells these to put a Cj tailgate on a Yj. The wire is there to slip up through a factory hole and still be able to manipulate the piece I to the holes you drilled. You can leave it as pictured, but I plan to spot weld it I to place in the center hole.
Tailgate fitting.
With my dad's 83 limited in the back.
Nice build!
Posted by Diggymart on 1/21/21 @ 10:34:00 PM