Civic RWD

2 minute(s) of a 14 minute read

This is a continuation of Part 5, which is all about fitting the front section of the Acura in the Civic. In this video, the new chassis from the Acura TL gets properly situated in the back of the civic. I add some chassis reinforcement, begin the new rear firewall and get the car to sit at its proper ride height.

4-23-2019

In this segment the Civic gets on its feet again. Well, the frame gets welded and the car is holding it own weight and sitting on the ground. The Acura TL chassis section is welded into the rear of the civic and some structural connections get made so that the civic is  again a car and not a big piece of scrap metal. These videos take a lot of time. If you like them and want to see me do more and better things please support the channel. You can find me on patreon and PayPal

4-24-2019

A short video of the removal of the Honda CVCC engine in preparation for a front suspension swap.

4-26-2019

I begin work on installing the front chassis and suspension from an Integra in the 1983 Civic. The integra chassis will be integrated into the civic chassis in the same way as the TL chassis was integrated into the rear of the Civic. There will be plenty of grinding and welding.