1966 Mk1 cortina GT She Drives!

2 minute(s) of a 319 minute read

That makes sense - I've started the inside as my plan around the car is;

Inside epoxy
Underneath epoxy
Inner wings epoxy
Seam seal
Outside epoxy
Then follow suit for high build primer apart from the underside.
Upol raptor the underside
Paint inside
Paint engine bay.

The doors will be off and primed and painted separately if I'm off somewhere I'm all ears as I've only painted airfix models up to get! Ill try and do tge prep myself and see what the result is before paint as I don't think I'll be able to lay colour at home.

The garage is pretty dry but I have a small dehumidifier that can sit in the car and run between filling and epoxy I suppose.

1-21-2018

I've had sanded the areas I couldn't reach with the DA, I found a few pin holes where repairs had been made but no photos as it's nothing amazing.

After clearing up the dust and crap inside the car i made up a first batch of filler I used the plastic lid - it's been a long time since I did filler repairs so I don't think I out enough hardener in so it felt soft after a few hours so I hope it sets!

I found a bigger plastic lid to use I used more hardener and that's set fine- I've started to sand it after an hour of cleaning and fighting spiders!

PHOTOS!