My 98GT 2v Teksid build by The Stallion mang

By diyauto
( 4 )

4 minute(s) of a 70 minute read

8-16-2011

Oooweee. Well she's in!!!! After a long day in the sun. Thanks a million to Masterofthepuppets99 I can't imagine doing that install alone, in a parking lot anyway. For some reason Photobucket won't let me load the pics. I'll figure it out tomorrow and get'em up. So after maybe a half day tomorrow i'll be able to start her up. Still got to put up the a/c, ps, intake and coil packs. drive shaft fuel filter you know little things. Got my tuner today, it has 3 different base tunes so thats cool. I'm beat though i'll get up with ya'll tomorrow.


Here's a few pics from the install yesterday:






For some reason it won't load the other pic. Photosuckit is right. Starting on the rest of it now and hopefully i'll be able to start her up at some point today. When I do i'll post a video of it.


modforce I got the xcal3000 so my tuner sent me 3 base tunes for breakin ect. and yes i'll be at the dyno asap. So finally got'er done. HOLY SHNIZIT!! It's bad a%$ Couldn't be happier. My tuner did great with the base tune first one idled perfect ran fine although I didn't drive it yet. Ya ya I know but i'm wore out. I brought it up to temp and shut her down. When your workin out in the hot sun all day nodody's around but when you go to fire it up the whole neighborhood wants to be involved so on this vid you'll see a few of my neighbors but here's a sneak peak. O ya figured out that my prochamber has socket ends and so do my flow tubes so i'm gonna have to hit the exhaust shop tomorrow to get the ball ends on them so I can mount my mufflers so this is Mac LT's and Pro chambers only.


8-17-2011


Ya when I verry first went to start it it wouldn't start and I was like man I didn't hear my FP prime. Tried again and was like.....O ya the enertia switch from relieving fuel pressure. Plugged it in and bam. Man my phones mic was squeeling.


Wld_Wst: Thanks, I couldn't I start back to school the day after labor day. 


Do all Mac PC's have "socket" ends at both ends? Just want to make sure mine wasn't modified, I bought it used. I wouldn't be suprised if they are after dealing with them. Probably so you have to use thier cat/axle back stuff. I need two 2 1/2" flow tubes with "ball" type ends on one side. Hope I can find a local shop with the equitment to do it. That can be done with one of those big hydrolic exhaust tube bending contraptions, right?


Well never mind on the mid pipe situation. I could've swore it had socket ends on it when I was installing it. But it has the Ball which is what I need so i'm gonna just bolt the mufflers up. Good thing to cause the muffler shop wouldn't touch it......no cats. I forgot about that. He did weld on my hanger for me though. Man with no cats/mufflers this thing is LOUD I hope the 2 chamber 40 series flows quite it down.


Mufflers are on. I think I might have to choose a quieter set of mufflers. I like'em loud, probably louder than most but.....


Don't get me wrong it sounds great, I just don't know exactly quite yet. I was thinking 44's or 3 chambers. We'll see. I do like the sound, ALOT.



Comments

Nice build!

Posted by MPower on 10/12/20 @ 1:52:26 PM