You must be logged in to rate content!
5 minute(s) of a 40 minute read
1-28-2012
Build Thread: Complete System Install in 2010 Hurst Challenger
Compliments of Hurst Pak #1 @ challengertalk.com
1-28-2012
Hi all-
I have been working on the system in my 2010 Challenger and thought I'd start a build thread.
I'll start with an equipment list and go from there.
Head Unit: Mcintosh MX-406
Mid-range Speakers: Stevens Audio Pro Horns w/ Large Bodies
Mid-bass Speakers: Stevens Audio 2ohm 6x9's
Subwoofers: (2) 15" B&C Neo Drivers mounted Free-air
Mid-range Amplifier: Milbert BaM 235a/b
Mid-Bass Amplifier: Tru Technology B2110
Sub Amplifier: Tru Technology B2200
Line Driver: Tru Technology L8-ix-R
Processor: Arc Audio PS8
Alternator: undecided
Battery: XS Power D6500
Interconnects: IXOS
Looking forward to everyone's feedback. Thanks!
Tuning with the OEM unit didn't work too well...
On to the Mac:
Temporaily mounted:
Custom Mount CAD Drawings:
The mid-bass drivers I'm installing in my doors have a phase plug in place of a traditional dustcap:
Because of this I wanted to have quick access to them so I could clean the gaps.
Once I had the factory grill trimmed out I started making what would eventually be the new grill:
Once I had the pattern designed I masked off both door panels in preparation for the fiberglass:
Next I trimmed the matting to the rough shape and glued it in place:
Fun with Fiberglass:
Once the resin dried overnight I peeled the mold apart:
Next I trimmed the edges and smoothed everything out based on my original template:
I changed the shape up a bit and layed my original speaker grill on for reference:
Next I wrapped the door again in preparation for adding heavier mat to strenghtening the molds:
Once this was dried I pulled everything apart again and did my final trimming, etc. Now that the mold is nice and strong I can start to add my removable grill(s) and mold them in place:
Here's the final piece ready for vinyl:
Nice build!
Posted by Diggymart on 1/9/20 @ 10:50:04 PM