You must be logged in to rate content!
2 minute(s) of a 255 minute read
4-26-2017
The blue is very dark indoors. Blocking work on the panels is underway.
5-6-2017
After this shot, not much progress has been made due to a crush of other finishing work on more advanced projects. So: no new photos were taken this week. Next week I'll drop off the rear seat so they can install seatbelt mounts and bring a bunch of old panels - that were removed from the car - home. I hope to have an update photo then.
5-14-2017
No update photo because progress (visually) was minimal. Also I couldn't get the panels because by the time I got there most staff had gone home. I did drop off the rear seat though.
5-19-2017
Nick Angiuli in Florida sent me a bunch of his surplus 404C side window parts for free! One of the two regulators with its cable was in perfect condition, so I will be using it in my car. The other stuff is surplus but I can now choose the best parts to use when re-assembling.
First order of business was to clean off the surface rust from the two regulators - the right one was from the passenger side of my car and the left one is from Nick. Then the metal was painted with Zinga, a cold galvanizing coating.
The next task is to clean the cables and lubricate the mechanisms with grease and cables with Würth HHS.
Wow a labor of love. Great!!
Posted by Diggymart on 9/7/19 @ 4:02:23 PM