The 1991 Neon Restoration Once Again! by josh.evans

3 minute(s) of a 72 minute read

well again my luck change . i put the door on with the slightly moved skin all lines up better but as i have moved it the gap from near the door handle to the car was too big so of i went and removed the whole skin of the door. nove least it will be done properly. and should be getting it all sorted this saturday hopefully.

also today went round and did bit more fillering just light skims to get rid of the pin holes.

will update again when the door is all sorted

4-25-2010

hi,well this weekend got some of my welding done. got my new exhaust all welded and put back on and no blowing now. also got the skin welded back in the CORRECT position and found out that my a panel has been put on wrong so cut the welds and pulled it a little bit and now the line between the apanel and door is near enough spot on. juat needs rewelding. and my door needs a little weld ont he side of the door hadle to make the lines all ok and now thw dooe frame is sitting perfect too all the top gaps a correct at last so last bit of welding then soon ready for primer!

josh

5-1-2010

cheers lads

got last bit of welding done this weekend rewelded the a panel in the correct place also welded a strip on the edge of the door to close the door lines ups looks great. also started to put my alarm in.on monday me and my dad are spending a whole day on the body so after monday it should be ready for primer. fingerscrossed

cheers
josh