Mini VTEC in Holland by Renessy

2 minute(s) of a 40 minute read

 




Hahaaaaaa!!!!!

2-6-2008

Hi all,

been a while that I've posted some updates but been really busy enjoying the twins. They are doing fine. Growing good that's for sure!

OK!

- the front subframe is bolted in place.
- got the hubs done and made holes in one axel for the speedo sensor.
- got my fuel pump and pre filter.
- got my fuel/brake lines. They are copper with PVC.
- also got my fuel sender. Have to change the output range but still, I got my fuel sender.......

Now I have to do the underside of the car so I can put the brackets on for the fuel and brake lines.... Hook everything up and get the back frame!

Cheers!

2-29-2008

Hi,

got some more picture to share with you all!

I put the pre-filter and fuel pump in the car. Made a bracket and made the fuel lines to the back. Supply and retour. Looks good to me.....

Also test fitted the seats in the car. I knew that the cobra's were to wide for the mini...... So I replaced the brackets and used some screws to put them where I wanted them. Hopefully I can weld the brackets to the crossmember next week....

Oh and I couldn't resist to let Justin test fit the seats....... Hahaha.