You must be logged in to rate content!
2 minute(s) of a 40 minute read
3-4-2007
Before I could put the hub together I had to remake the axles.... A guy at work wanted to do this for me. Turned out looking fine:
Been busy painting stuff to. The brackets for the chairs and the pedalbox.
Also remade the plates in the old engine bay. Chris gave me the tip.... Took a look at the pictures I made at Zolder from the Vtec car. Hope I took enoug away!
Have a welder too! If everything is going well he'll be here on the 11th. After that I can sort things out and paint the inside of the car! Been busy sanding the inside for a great part.
Steady as she goes!
Laters!
3-16-2007
Made some more progress this weekend.
Welded the boxes shut on the side:
And welded the boxes on the back. (Also put a bar between them for strengt and I can make a bracket for the exaust on it):
Also done:
Now I'll have to tidy up all the welds and prepair for the next welding.....
Laters!