You must be logged in to rate content!
2 minute(s) of a 40 minute read
10-18-2008
oke, some more pictures of the build;
Re-did the gas pedal because the cable wouldn't come back, re-did the fuel lines because the exhaust does run underneath the engine.... (I guest it didn't....) Exhaust is pre-fittted and did the handbrake cable......
3-15-2009
Damn! My last post was last year october! I've been real busy with everything BUT the mini...... Well I've done some small things.....
I've also searched my ass off for the inner joints..... They are really hard to find here (or rediculously expensive) But hey! I got them!
I also made my own air filter box. This will probably be temp cause I'm going to fit an open filter after the test in Holland..... The inlet will be on the underside of the box and will run to the side of the mini.
The exhaus is nearly finished. (Many thanks to Poly Patje for the TIG welding) I only have to cut one pipe and spread one side so it can slide over another..... The 'noise' valve is installed too! (hope it helps....)
Further:
Installed and got it working, the gears and shifter! (no pics)
Got the engine cover done (no pics)
Got cluch lines in place! (no pics)
More to come soon