The Wifes Worst Nightmare 83 Full Resto by Minidarren83

By diyauto
( 3 )

4 minute(s) of a 192 minute read

11-9-2013

Well here we go minus some minor adjustments it's done

The first thing I encountered was the struts were too far forward to allow the boot to close so chopped the rear mount out sliced the back off then welded it back on the parcel shelf. One of my captive nuts let go too so welded it in for good

null_zps126d2647.jpg

Then on with the boot lid I will be using. Not a bad fit like I say some minor tweets needed

null_zpse0606e06.jpg

And up it goes

null_zps50ba4f9e.jpg

And here you can see how it all mounts up and how much I've braced the hinges

null_zps5bb5be47.jpg

null_zps43e57b2b.jpg

And all the way up

null_zps786efb28.jpg

And a video for you all. It all needs making a little smoother but all in the tweaks and smooth all the welds over

http://i1166.photobu...zps88d78be0.mp4

Pretty chuffed really


11-19-2013

Last installment in the boot saga and it's done lock fitted and working I made this little bracket to hold the lock to the boot floor in the desired position

null_zps96f98e47.jpg

null_zpsa0224ac5.jpg
Then welded the little bugger to the boot floor

null_zps7eebdf91.jpg

And this is it fully working

http://i1166.photobu...zpsed6c0046.mp4

Just starring to get the arches ready to fit lots of grinding to do


11-27-2013

After a much needed few days away up north in Bradford I've now Got a couple of days off work so trying to get the car ready to fit the subby so that means all bodywork getting finished. Today I cut down and cleaned off one of my donor arches then and for those that have rear over the build made a lip for the rear of the arch to boot floor and fitted the arch

D90F7670-117F-4A6D-9EFA-B99272B70D1B_zps

Also needed a small patch on the arch

E675AAF7-A1B4-4EB2-A155-68E334754AB6_zps

Then fitted the closing plate at the front of the arch

C02B5CD5-26D0-4FE9-8C5C-1627B9749EE1_zps

And I was left with this

D3AE59E9-65D7-477E-A67D-2232AECA5EF2_zps

And after many trimmings and trial fitting I'm ready to drill holes and weld the quarter on

70B384AE-C92E-4349-8276-D5C9CFCB6C30_zps

F2F246D8-0823-4680-AD4E-C51B16B4CC08_zps

Not got a whole day tomorrow but I should have it fitted and the arch tubbed by the end of play tomorrow



Comments

Wow what a build!

Posted by Diggymart on 1/17/20 @ 10:10:34 PM