The Wifes Worst Nightmare 83 Full Resto by Minidarren83

3 minute(s) of a 192 minute read

UPDATE TIME!!!

got in the garage today and spent a few hours in there not that you would tell i managed to get one a panel fitted but its such a long process i had to modify the a panel at the top and bottom



also got the front panels back on and taped the bonnet on to the wings so i can remove it all and weld it up but after removing the front lip of the bonnet the front panel sticks out about an inch so ill weld the rest up then force it back in and weld that up too





not much at all but took me all afternoon lol and also in other news seriously considering going rover k series 16v just dont think i will get the power im looking for in an a series without lots of money plus 5 gears but i will continue on with the shell for now and think about it later

3-28-2013

UPDATE!!!

got a couple of hours in the garage today so fitted the passengers a panel on pleased with the results



good even door gaps all the way round not bad considering i replaced the door post







then i made up two of these little stiffeners



they are for the a panel to stop it flexing around with the flip front like this



i should get them welded on over the weekend. and what took most of the time was sorting out the man cave i should have enough room for the k series when i hopefully pick it up this weekend



as usual not much but all a step in the righ direction