Monty the Rwd R1 engined tarmac eating Minus by Alburglar

2 minute(s) of a 160 minute read

This is the base of the b pillar that needed repairing. It has cracked and was seperating from the body.

I have dremel'd it back and aplied more grp.

I also filled the old fuel tank hole with grp

Since the photo, I have sanded it to match the swage lines and applied a skim of filler. I'm just waiting for the it to dry before final sanding.
I then filled the old exhaust aperture on the rear valance. I adopted a rather heath robinson aproach but it got the job done.

I had previously cut some holes in the dash for two small electric heaters, this was my first attempt to solve the de-mister problem until I came up with the pipe idea, shown on previous pages. So I filled these holes up, the dash will eventually be sprayed matt black.