You must be logged in to rate content!
6 minute(s) of a 112 minute read
10-12-2014
I use u-pol dolphin glaze.
Most of the filler work is done on the near side and the final alignments of the door are all sorted, here's a few pictures of how it's looking.
10-16-2014
I ordered a pair of new rear doors and they arrived yesterday, I wanted to save the Curtis ones as they are too unique to use!
I did a little bit of filler work on the other side too but not a great deal
10-19-2014
Got the final few bits and bobs sand blasted today
Also did a bit more filler work on the other side
10-28-2014
Another couple of smaller bits of filler work done and I have made a start on the grill
11-8-2014
I got the final bits of filler work all finished off the other day
Once done I could get the shell ready for primer, so the whole car needed to be rubbed down and double checked.
Then I gave it a cost of 2k etch primer
Once this was dry I sealed all the seams
Great build!
Posted by Diggymart on 2/13/20 @ 8:14:55 PM