You must be logged in to rate content!
2 minute(s) of a 203 minute read
7-20-2012
Ahhhh, my wheels arrived! I mounted the tires. Here are the fronts:
And I was able to finally bolt the rears to the axle and take a measurement. I will need to have 9.5" cut out of the rear axle. For whatever reason, I didn't get a side view of the wheels. They are recessed 3" where the fronts are flush with the outside of the rim.
7-24-2012
Ok! Suspension is mostly fabbed up. I have a few more welds to do and some collars to cut and fit. Here is how it looks though. Remember, ride height is adjustable and I will do an alignment when the car is all assembled.
Comments
This thread was donated to our website to be preserved. If you want to message the author, please click the source link to contact.
Posted by diyauto on 8/25/21 @ 1:32:42 PM
This is a great build with so much time and effort put into recording in words and pictures. Can you help me with this question please, Is the top arm inner pivot point is in the same place as the original pivot point? Regards Davy
Posted by DavyF on 4/16/20 @ 6:44:51 PM