You must be logged in to rate content!
3 minute read
11. Remove the 2 screws holding the armrest from the base.
12. ...and lift the armrest off the center console.
13. Turning the armrest upside down, remove the 4 screws (2 front and 2 rear)...
14. ...holding the top of the Armrest to the bottom.
15. Using the flathead screwdriver, gently pry the bottom from the top.
Slide your RedlineGoods Armrest Cover over the top of the armrest.
Ensuring the armrest cover is pulled tight, press the bottom of the armrest back into the top and reattach the screws.
Set the armrest back into place on the center console and reattach the screws.
16. Reinstall all panels in the reverse order of removal. The forward section of the Right Upper Panel must be inserted into position first (notice the tab that must go under the adjacent panel), then the lower catches inserted in the Right Lower Panel before snapping the clips in place. Reinstall the shift knob.
CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!
Useful tip
You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.
Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.
