You must be logged in to rate content!
2 minute read
RE: 3rd brake light
Compliments of georgekale @ jaguarforums.com
7-26-2010
Here is the procedure to remove third brake light assy. I hope this will help.
Exterior Lighting - High Mounted Stoplamp
Removal and Installation
Removal
1. Remove the liftgate lower trim panel.
For additional information, refer to: Liftgate Lower Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
2. Disconnect the high mounted stoplamp electrical connector.
3. Remove the high mounted stoplamp.
- Carefully release the Torx bolt covers.
- Remove the 2 Torx bolts.
Installation
1. Install the high mounted stoplamp.
- Tighten the Torx bolts to 6 Nm (4 lb.ft).
- Install the Torx bolt covers.
2. Connect the high mounted stoplamp electrical connector.
3. Install the liftgate lower trim panel.
For additional information, refer to: Liftgate Lower Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).