S2K Push Button Start by 03tLsNBP

4 minute read

S2K Push Button Start

Compliments of 03tLsNBP @ https://acurazine.com

2-15-2011

I posted this mod in my progress thread but I figured I should post it in a new thread so it can be added to the DIY thread if it is worthy enough.

DISCLAIMER:

This engine start button is in ADDITION to your turn-key ignition. As long as you tap the wires, there will be no changes to your existing wiring. THIS IS NOT KEYLESS IGNITION. You will still need to put in the key and turn it to the ON position. THIS MOD IS FOR COOL FACTOR ONLY. IT IS NOT A REAL KEYLESS IGNITION.


Here is the wiring diagram:

Parts list:

Engine start button: Part number 35881-S2A-911
30-amp Relay: here
16-18 gauge wire
20-22 gauge wire
heatshrink (various sizes) and heat gun


The install is pretty straight forward. Feel free to ask any questions. I will answer to the best of my ability.


Here are a couple videos to show it really works:

Happy Modding