You must be logged in to rate content!
2 minute(s) of a 61 minute read
2-25-2010
FPR parts are rolling in.
THE Aeromotive came from Amazon, the gauge came from ebay, the fittings came from Jegs.
That is a mock up of where it most likely will go. I made the bracket from a garage door hanger I had lying around.
I ordered the fittings based on what Jegs told me, I hope they are right but can't say 100% until I have them.
This is a c&p from their email.
I am afraid I can’t tell for sure if it is 1.5 or 1.25. I have to believe it is a 12x1.5 to -6 # 799-670510. we do not have a -6 x 1.25.
That is the adapter at the stock FPR, following are the other fittings from the Aeromotive.
555-100041, 555-100021, 555-100071
I just ordered them, should be here Tuesday.
Not here. Not now, not ever.
UEGO came in!
3-8-2010
03 tails are in!
AFR mostly in.
The 02 sensor is wired into the car but needs to be run behind the dash.
I am going to cut a hole in the cover behind the gauge so it can go in further.
Great detail thanks for sharing!
Posted by Diggymart on 7/12/19 @ 1:25:36 PM