1960 Chevy Sedan Delivery LS swap by 2165 Turbo Rail

3 minute(s) of a 15 minute read

Dad wanted side pipes... so he got them. I'll get better pics of them tonight

I also go the harness all cleaned up. we ended up putting it on the front of the drivers inner fender... not my favorite but we were able to make it look pretty good. I also got the Cable X box mounted and wired up.

http://360.io/9A3xkC

the garage... the bright walls are a big white neon arrow on the left and the blue is an Allstate sign on the right

doesn't seem to open in firefox, if you have a gyroscope in your phone you can move your phone around to look around the room

Ok tell me what y'all think ( not that I'm going to change any of it )

I tried to make it as clean as possible 

Obviously the computer is on the front of the inner fender The black box on top is the Cable X box which takes the speedo output from the computer and turns a cable so we can keep the stock speedo ( did the same set up on the GTO) 

There is going to be another black box toward the back of that inner fender for the Dakota Digital cruise control but I haven't mustard up the want to start that mess ( looks confusing but I'm sure it simple) 

Anyways tell me what y'all think 

Before

After

I just noticed that I didn't take any pics after we got done.

the entire engine bay is pretty much done. The power steering is all hooked up. The alternator is on. the only thing that isn't on is the 90* bend off of the throttle body to the air filter.

that is tomorrow's project. We have the lokar pedal that bolts to the firewall and has the harm sticking through the floor. we have to do some patch work first thought because this thing is eat up with rust on the floors.. this weekend it is going back to the painter to have the pans fixed

the lower hose is a Gates part number 21503 and I added it to the post with the hose in it so anyone else can see it easily too. thanks for pointing that out.. I'm updating here and on Dfwmustangs so I must have missed it here.