You must be logged in to rate content!
1 minute(s) of a 20 minute read
5-31-2021
Big day yesterda, the truck took its maiden voyage around the block! Air system is fully functioning.
I wired and plumbed up the compressor but it wouldn’t spin. Sprayed it with WD40 and added a little more oil and turned it manually to get it working. Eventually it was loose enough that it started spinning from the engine.
It fills the tank fast which is great.
truck drives pretty well! There is a clanking noise coming from the front driver wheel area I want to look at. Also need to replace the starter solenoid as it doesn’t engage the engine about half the time. Then a quick run through of the engine bay. Lots of loose wires and hoses that I need to clean up.
Also gotta vaccum all the crap out of the cab throw a Mexican blanket over the seats and we are good!
Excited to take this cruising
Comments
Was fun for the Woodward Dream Cruise this year!
Posted by Diggymart on 9/9/21 @ 3:18:00 PM
Hi! Nice work on the build. Amazing progress! By the way, I've checked air lift suspension on 4WheelOnline after reading your build last week.
Posted by AutoBee on 2/11/21 @ 3:03:47 AM
Thanks! Finally got it running. Just some finishing touches and we should be on the road.
Posted by stevegolf on 5/24/21 @ 1:41:53 PM
Keep it going !
Posted by Diggymart on 8/11/20 @ 3:05:14 PM
Keep it going !
Posted by Diggymart on 8/11/20 @ 3:05:10 PM
Love the truck!
Posted by bdub on 8/11/20 @ 3:03:42 PM
Nice pics!
Posted by Diggymart on 2/15/20 @ 9:56:16 PM
Was fun for the Woodward Dream
Posted by Diggymart on 9/9/21 @ 3:18:23 PM