You must be logged in to rate content!
23 minute(s) of a 49 minute read
1-1-2021
New Project - 57 Chevy Z06 / 4l80e
Compliments of syborg tt @ www.pro-touring.com
10/15/2006
It looks like my dad got the bug. We bought a 57 Chevy last weekend and he plans to have it finished by Good Guys Columbus 07 or at least that is the current goal.
here are the specs:
Jim Meyer Complete Chassis w/ Wilwood brakes
Street & Performance Fuel injected ls6 Zo6 405 hp
Street & Performance ac, alt, ps and water pump
Street & Perfromance Chrome plated brackets and acc serpentine set up.
4l80e Automatic Transmission
Strange 9" Third member, 3.70 posi
Vintage air poilshed ac condensor
Polished cross flow radiator
Rock Valley Stainless Fuel Tank in intank pump
Billet Specialties Chicanes 18" front and 20" rear
Nitto 235/40/zr18 front and Nitto 305/40/20 rear
All the original chrome was re-plated at sherms in California.
Pinkees Rod Shop in Windsor Colorado hand fabricated the center console, inner fender panels, firewall, mounted master under the dash, installed the Ididit tilt column, Lokar shifter and brake lines. They also repaired any rust and replaced with new metal.
Underneath the car is lined with Superliner.
http://www.sportmachines.com/piwigo/index.php?/category/184
I am completly open to any and all idea's you guy's want to share. So please post away and give me all of your idea's and suggestions.
Car was picked up and sent down to Kenny Davis Hot Rods
here are the pics from 09-26-06
Kenny sent some pics yesterday.
looks like they are going to have to make some inner fenders
that's it for this week
Headed down to Kenny's Shop this weekend. Meet up with Kenny, Travis and Kenny Sr. to look at the progress and talk about everybody's goals for the car. Good thing we all agreed on the future of this project. Build or Bust Baby.
The Guy's worked the inner/inner fenders to fill the void looking through the grille.
This is the panel at the back of the wheel well.
A closer look at the panel. You can also see the panel that is going to close the void by the steering column
Once we were done looking at all the progress up on the lift. We took it off the lift so we could get a good look at the stance.
When we got home on Saturday. Kenny called me to tell me that he and already cut the exhaust off and re-routed it above the axle and out the side. These guy's are cranking.
Did I mention that my Dad couldn't have been happier with the progress of the car and the group of guy's working on it. He even said he was thinking about flying down there every weekend just to hang out.
10/27/2006
Last weeks update - forgot to post the pics
Kenny decided it would be easier to fix the panhard bar by relocating it to a better location. It would make running the exhaust a little easier
mount on the rear end
Kenny Re-Routed the exhaust up and over the rear end instead of under the rear diff (this is how it was routed when we purchased the car)
12/11/2006
okay it's been a long time since we've done an update. So here goes
Core Support all clean
new Hood from VFN
start of the engine cover and the continuation of the core support
let's step back and take a look.
body work has begun on the donkey _ _ _k
12/18/2006
Quick Update.
looks like a bumper end with out any chrome
wait it was a bumper end - now it's attached to the center section.
were going for the smooth and clean look on the front end and i think we've nailed it.
1/8/2007
I couldn't wait to show off the Rendering that Carter did for the 57. Carter has got to be one of the easiest guy's that i have ever worked with. He had no problem with me trying to get it just right. If you like this rendering you may want to have one done of your ride.
you can e-mail him at: [email protected]
1/16/2007
Quick Update
Looks like the car is coming apart to get painted. I would post some pics but that Kenny Guy needs a new Camera. Looks like i am going to have to buy him a camera.
1/21/2007
we have paint
1/22/2007
more pics - really these guy's are good
2/6/2007
the chassis is back from the Powder Coater and the guy's put it all together.
2/13/2007
A couple more pics. When you see the pics you will know that Kenny didn't take them.
the new money shot
ps - after seeing the pics i am really convinced that we need to buy Kenny a new camera.
3/15/2007
Yep i know it's shocking but i do have an update.
Funny thing is that i should have posted pics on 03-05. But i just haven't had time. So I will post this weeks update today and go back and do the last two this weekend.
We contacted Classic Instruments for the Guages for the 57. They offer a set up for the 57 and we love the layout. We wanted to do something a little different so we asked if they would change the design to the All American Series. They said "No Problem" They have got to be one of the best vendors i've worked with. I look forward to using there product on future projects.
Mounting bracket
Okay time for the Kenny Davis Roast.
okay this looks like the wiring but of course we can all figure that out.
This would be the instruction book. I am fairly certain the Kenny's dad wouldn't have to read this but Kenny probably has to.
Okay this is a tough one. With the way he's holding it. I think it may have something on it that he is afraid to get on his hands
now that's a box a very nice box.
and this is the bottom of another box. I really think he likes the locking bottom of this box. Maybe it just impressed him and he felt like he needed to take a picture.
I'm quessing this is the "Blade" that he keeps under his desk. I bet he is going to use this on me the next time i am at the shop.
and Kenny don't think your keeping that shirt I saw it in the box.
4/2/2007
It's getting closer.
4/12/2007
Holy Cow - We have a smokin update !!!
4/16/2007
Well, it looks like it made it in the May issue of Chevy Rumble.
We couldn't be happier.
It say's some really nice stuff about those guy's at KD Hot Rods.
6/28/2007
Okay so way back in March......
Air condition is mounted in the trunk
Stated painting the interior
Battery mounted next to the Air Condition
Fuel Lines and Billet Specialties Fuel Filter. It's even ribbed for your pleasure.
The exhaust is has been re-routed and coating for protection.
gee after the last two post I think I should see if my wife is coming home tonight.
This was a very long day. After 9 hours of Driving we arrived at Tracy's shop.
the Recovery Room
Here is what appears to be my dad sleeping in the front seat of his car.
Quick shot of the engine
Hey Kenny isn't there something that is suppose to be here.
Quick Picture of the interior
Quick Picture of the Dash
okay here we go
Okay from the looks of it Tracy is a little better then Kenny with the camera.
However he needs to take bigger pictures so we can all enjoy them.
Okay time for an update on the 57
Normally i have a bunch to say.
In this case the pictures will do all of my speaking
Just in case you forgot this is what the interior looked like when it went to Tracy's
Rear Speaker Tray - Speaker Enclosure
really this is the last post
and we end with the headliner.
9/30/2007
Okay it's been a while so i figured i'd post some pics.
The bumber came back from plater.
It's done to all the detail stuff so were getting close.
just some of the little stuff that the guy's have been working on.
the grille needed to be extended since we reworked the front bumber.
10/23/2007
I can't tell you how happy My Dad & I are with Kenny & Travis. They did an awesome job on the car and Sr is looking forward to driving it. The bad news is when it get back to Chicago the weather is going to stink so it will go in storage for the winter.
We do plan to show it at the Chicago Chevy Vette Show on Nov 17 & 18 and in Detroit on March 7th & 8th if anyone wants to see the car in person.
Couple Quicks Pics
\
Okay so who took the picture if there both working on the Car.
10/29/2007
okay the wheels are on the car and i am fairly certain that the only bad Mojo was a dear on the way there.
I want to thank Budnik for putting such a nice set of wheels on the car.
10/31/2007
Well, the 57 is complete and I figured I would update and conclude the story as to how this project got it's wings.
First it was the the Ebay Find. (( www.ebay.com ))
Then the Rendering by Carter Hickman
Then the Builder
Kenny Davis Hot Rods www.kdhotrods.com
Then the Magazine Shoot
Then the One-Off Guages for Classic Instruments
Then off to the Interior Shop to see Tracy
Recovery Room Interiors www.recoveryroomrodinteriors.com
Then Back to Kenny's Shop
Now it's down to the details
The race to Sema
Wait we have new Budnik Wheels www.budnik.com
The finished project heading into the trailer, yep this is the recovered trailer that was stolen only 3 weeks ago
Okay that is almost the end of the story.
5/28/2008
As most of you know i'm not good at leaving well enough alone.
So were back at the 57 with a little more work.
Bob Thrash from Rad Rides is doing some sublte changes to the styling of the 57.
The first change is the Engine cover
Back into the paint booth
Adding a little color to the back fin
Now the Artwork
LS6 - 4L80e
Steping back a little
looking into the car ( ps the color is much darker )
Dream Weaver Interior
Jim Meyer Chassis - Billet Specialties Wheels