You must be logged in to rate content!
2 minute(s) of a 61 minute read
1-8-2014
OK, so moving on decided to add a little more to hood design. Came out with runner going towards scoops, and tapered the rise in the middle.
This is the finished work on factory hood, ready to lay up the actual mold
This is the actual mold, laid up on the factory hood. This is what we will use to make hoods.
1-11-2014
Today I rebuilt the clock as I'm getting ready to reassemble the dash....
Out of two clocks, one runs perfectly but has a broken adjust knob. The one with good adjust knob does not run due to a broken wheel inside the clock mechanism. So I decided to convert the clock with good knob to Quartz. I got the kit from Instrument Services Inc. in Illinois, came with good instructions and is running perfectly....keeping good time.
Now I just need the reproduced lens from WCCC...
1-18-2014
OK....so here's the final rebuilt clock...It's ready to go back into dash, keeping perfect time and looks new thanks to WCCC's new reproduced lens!
Great build and details! ?
Posted by Diggymart on 12/3/20 @ 8:27:45 PM