Greddy's build thread!! Better late than never!

By diyauto
( 2 )

2 minute(s) of a 223 minute read

3-13-2013

3-13-2013

so, replacement clutch fork came in, also replaced the bleeder on my slave cylinder with an M10x1.0 speed bleeder, makes bleeding an easy 1 man job, I have a spare one in case anyon wants to buy it. Already replaced all 8 bleeders on the brembo so this was the last step for ease of maintenance. Tranny goes back in tonight.


4-2-2013

sound clip of my Greddy exhaust from a few weeks back before it got taken off for the 3inch turbo back with magnaflow and blast pipes, my friend video taped it upside down :( I'm gonna miss how quiet it was but can't wait to get back in town and get clips of the 3 inch turboback. 





4-2-2013

honestly, for a quiet DD exhaust I would do something like the GReddy SE with a stock evo downpipe. Idk if you have a downpipe yet but I still have my downpipe and custom test pipe that will bolt any evo downpipe to a galant catback that I will sell you for cheap, has all the hangers modified to bolt up to the stock galant location and will clear everything no problem, even has extra O2 bungs welded in. when I floor it inside the car all i hear is the spool of the turbo, induction noise, and the bypass valve when I let off, the exhaust is so quiet that I can do a 3rd gear pull with the windows down and have a pleasant conversation with my girlfriend about how I'm driving too fast.


4-5-2013



cold start and some free revs to about 4-5k, sounds even better under load, no drone on the freeway @ 75mph. I'll try to get a drive by video tonight.


4-15-20


Comments

Sorry about your friend. Thank you for sharing your project!

Posted by Diggymart on 11/1/19 @ 11:01:58 AM