Project:Soarer by megamax

3 minute(s) of a 462 minute read

so i found out the other day what the real size of my hotside is... no it's not a t4 like i thought it was..

and it's not a t6 either...

hc1(left) hx30w(right)

you really can't tell by the pics as the h1c looks bigger than the 30 flange.. but

t3 gasket..

TADA!!!! IT'S A DIVIDED T3 FLANGE!!!

2-27-2012

so last week i got my manifold in and my adapter flange also because apparently they don't make t3 flanges for the 1jz. and the adapter flange was a little off.(go ebay)

i had to dremel 2 holes to get it to slide down.

and locktited these bolts

had to take my manifold up to mr austin to get braced. and the wg flange to get clocked and welded back facing the wrong direction(thanks again ebay).

so in the mean time since i have some mk4 supra seats on the way i was gonna chuck the stock boat ancors of stockers. but i wanted the rails so i could use some aftermarket seats or sell them later on. getting these things out were a freaking pain. luckily i got a chance to use my dual saw for the first time..

didn't see any easy to remove bolts and there was a motor on each leg that kep it there so had to cut the side of the tracks and excrete them.

and viola. i will be selling these pupies for $90 bones..

SO came into this 2 car garage here in town iam renting. my first 2 car garage and very spacious. with things like these who the **** needs kids??