You must be logged in to rate content!
2 minute read
LEXUS IS 2006+ SHIFT BOOT/E-BRAKE INSTALLATION INSTRUCTIONS
1. Remove center console by first pulling up from behind cup holder lid, and it should all unsnap. give it a firm, but controlled tug, don't worry it wont break.
2. Position the new shift boot where the old one was. It is much easier if you have ordered the bracket from RedlineGoods to go with the new boot. Otherwise you will need to cut the bracket ouf ot the old boot and feed it into the fold on the new one.
3. Install the new leather ebrake boot into the center console.
4. Reinstall the center console.
CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!
Useful tip
You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.
Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.
