RCBs ISF build thread by RCB

By diyauto
( 3 )

2 minute(s) of a 48 minute read

5-23-2014

5-23-2014


The harness is from the TRS kit but the projector isn't. It's actually part of a kit for a corolla. I work backwards from the stock Toyota part # for the OEM corolla fog light and I figured out that it is the same as the ISF fog light. That means any aftermarket Corolla fog light kit will fit the ISF, you end up not using part of the kit but they are cheep so who cares.


TRS just put a H1 plug on the output side and H11 on the input side of the harness to make it PnP for me. The only mod the proctor housing needs is for the back cap to have an ovel hole cut in to it so the back of the Morimoto H1c bulb can fit.


I'm not a huge fan of angle eyes being on without the projector but I'm going to hook up the switch to control them seperatly just so I have the option later if I want it.


I can put more of these "RCB fog light kits" together and make an installation instruction sheet if anyone wants this set up but doesn't want to deal with the details.All proceeds would go towards a SARD tune, LOL.


7-27-2014


My latest mod is a set of black 26" Versante wheels for the D.D. / tow vehicle. Now I have black wheels on the Denali to match the look of the ISF.

Much better then the chrome 22s that I had before. Those are getting powder coated black and will become my winter wheels to keep the black theme going all year round 




Comments