My 600+RWHP Build by mini_me

By diyauto
( 4 )

5 minute(s) of a 34 minute read

10-9-2011

My 600+RWHP Build


Compliments of mini_me @ ctsvowners.com



10-9-2011


Well,


After having a blower go bad, I decided to do the upgrades I've been meaning to do. So I debated my iptions and decided not to cheap out on parts or quality since this IS my daily driver and I will be going WOT 5-10 times a week.


Before mods:


9.55 Pulley

W4M Intake

W4M tune


After:


KDI Proted Blower/Snout

KDI Heat Exchanger

LS9 Cam

2.85 Upper

PAC racing springs

ID 850 Injectors

NGK TR6 Plugs


So while I am waiting on my Heat Exchanger and cam gear, I decided to begin throwing on the new blower, springs, and injectors. The springs took some time because of me being careful (my first job this big). After A valve dropped into the block, I managed to get it out somehow. The valves were done so then I began on the spark plugs. SOOO much easier changing these out while the blower is out. Got that out of the way and then onto the blower. Everything went fine and so now it was time to start the car. To check for leaks before firing it up i turned the key but didnt ignite. Sure enough, an injector was leaking fuel. Kept trying to get it to fit snug but no good. I ended up changing out one of the O-rings out to the stocker and that fixed the leak. So I fired up the car and after a little blue smoke (hadnt started the car in over a month) the black smoke came. It went away after a couple of seconds but I expected it so didnt freak out. I took it for a 1/2 mile spin to test driveability and it rode like crap. Driveable but crappy. I got on the revs while in neutral and all you can see is black smoke because it is running rich. I parked the car for the moment until i get the cam installed. I should be getting that done this week so I will post more pics. After that, off to the tuner  Any suggestions/tips as I prepare for the cam swap?

































FFFFFFFFFF!!!! I mean, I literally drove around the lot...That will kill the plugs? I still havent gotten the injector data from Damon. If he sents it, have him send it in a zip file so its not corrupted. I had problems with files coming from the states before thru UK servers.


I got it. Thanks! Hopefully I get the HX and cam gear soon. Almost feel like tuning and then save the cam upgrade for later since the weather is getting cold and wont be needing a HX as much.


Yea you did mention that but a couple of gear heads at the shop were insisting ill be ok. Lesson learned.


I'm gonna put the car on a dyno..any guesses what it will put down? 6 speed manual so I'll guess 625 



Comments