TA 0291110 Buildup by slimfromnz

2 minute(s) of a 88 minute read

Hi all,

More progress.

I have made brackets for the vacuum pump and alternator. The only concern I have is the belt contact on the alternator. I can run a second belt from the crank pulley to the alternator pulley if it becomes an issue.

Here is the CAD(cardboard aided design) template I started with. The alloy round bar is for the spacers. And I used 6mm alloy flat bar.

Sort of jumped the gun with photos. Here is the finished product. The adjuster is a sbc one I bought and cut all the crap off it.

This spacer connects to the adjuster. I made it an interference fit which seems to have worked great.

I also have the -12 welded to the rocker cover and a breather welded into the other for the vacuum pump. I will take some pics and post.

We are looking at Dyno time in the next week or two. They havent finished installing the dyno yet.

Cheers