You must be logged in to rate content!
2 minute(s) of a 88 minute read
10-23-2013
So close to finishing up the sump
Went thru and welded up some of the longer runs as I will have about 15kg of oil sloshing around and want to minimise the risk of stress fractures
I made up some anti-surge plates for the front and rear of the windage screen
Here they are installed. These will stop the oil trying to get thru the screen under accel/decel.
Trapdoor assembly welded in place
All I have to do now is the scraper and cut an access for the pick up to pass thru the screen
Cheers
10-29-2013
We have finished moving house so I took the opportunity to finish the scraper and pickup cutout
Had to work out how to get around the pickup tube
Now to clean it up and get it powder coated, back on the engine, back on the dyno 
Cheers
Nice pics!
Posted by Diggymart on 5/12/20 @ 2:53:28 PM