1968 Volvo project Pure Volvocity by 68EFIvert

2 minute(s) of a 519 minute read

The exhaust holes have been made into the valance and the drop down panels are in. I also added a tow hook that is removable. It tied into a boxed in frame rail. Once removed a filler panel/bolt will go in to cover the hole.

The license plate is about to go in. It will be flush on the bottom and recessed on the top. The corners will be rounded and a trim piece will go from both sides and on the top. The trim will be removable and 1/4" thick and chrome plated. Basically the same as the trim around the tail lights. The sheetmetal on the outside is to keep the panel from warping while cutting and welding the license plate

Next up on the rear will be fitting the rear bumpers.