1968 Volvo project Pure Volvocity by 68EFIvert

2 minute(s) of a 519 minute read

Painting is done and polished. Assembly has started but the glass guy is now the bottleneck. Here are a couple sneak pics of the car.

Thanks. The engine going in should be about 500 rwhp naturally aspirated. It should scoot along pretty well. I just don’t have any space for a turbo but if I did it would be pretty easy to make 700 HP. As it is, I likely have more ho than I will be able to use on a street car. That is why the car will have ABS and traction control though.

10-19-2020

I actually have all the controls for cruise control but when I switched to a Haltech computer I am not sure if it will still work. The connections ran through the OBD port on a stock computer. It may work with the Haltech but I won't know until I get to that point. The wiring phase will be pushing the boundaries of my knowledge level on this build. I will push myself further and learn a lot. Should be fun and frustrating at the same time. Hopefully more fun than frustrating.