Volvo X (1967 Pro-Touring Amazon) by Iamtheonlyreal1

7 minute(s) of a 758 minute read

Here are some pics of different views of the P1800/Amazon front and rear kits together.. Keep in mind, this is our base kit with base brakes, but this what you see is the minimum of what you get... All the front end kits come fully assembled and ready to install, no welding, no cutting, so once you have your factory components removed, it literally slide right in and matches up with all the existing Volvo bolt holes.. You can also see the front end kit actually has longer braces forward of the OEM. And we do this, because after you remove the factor steering components, the extra reienforced holes are there to utilize for extra support and bracing of the new front crossmember. 

9/24/2012

Well, it has been a bit since I have updated anything on this car, but there has been alot of development and behind the scenes going on.. I have been waiting for a few more key parts be finished up with the CAD work and cutting programs, so I can install actually production parts on this car.. I didnt want a car on the road, that wasnt actually running the production parts people are buying.. I think it would be a bad thing to take this car to events, and have people notice some key items are different from what Swedish Ops is offering to the public... I hope to have it on th road in the next couple of weeks, and I am waiting on the Production Driveshaft, LS Conversion Radiator, Conversion Headers, and the New LS engine to be delivered.. 

Here is the Mock Up Accessorized Ls Engine/Keisler RS600 5-speed in the hole, and as you can see, it fits great.. Here is the interesting thing about our Front Suspension/Crossmember kits. The motor sits lower and further back than the original 4cyl, but you can drop the oil pan, remove the headers, change spark plugs, change AC compressor/altenator/power steering pump, etc, without even jacking or moving the motor..

In these pictures, you will see the multi piece firewall conversion mock up, but it has all been CAD'd and in production, so I will be installing the new productionfirewall conversion kit during the new engine replacement. Most of the underhood is still the factory structure, with only the actual firewall changed.. The fender wells, core support, and unibody structure is still factory and un-modified, as you can tell by the factory paint.

You will also notice the cowl air intake for the heater box is still there, and I cant cut it off, because it has Car Numbers on it, so I am going to use it for a engine compartment heat escape.. I am going to make a nice dual funnel system, that will draw the heat out the cowl vent.. I hope I can make it look right, along with function correctly, because I cant really remove it without potential paperwork problems later.. 

I will also be running the Wilwood Pedal Assembly hidden under the dash, with the remote fluid resevoirs, so the brake booster option for the firewall will not be there also.. Once the production Firewall conversion kits is fully installed, things will look much cleaner, and I can prep and paint under the hood..

Before

After, before paint and new motor

9/25/2012

I think I came up with a better idea for the old heater vent. I am going to use the cowl vent as a fresh air vent for the motor, by building a fitler box that attaches where the factory heater box did, and then have two intake runners that will run along the top of the valve covers. I am really considering, having a Louvered Intake Cover that is bridges the gap between the two runners, and will hide the intake and injector wiring.. It should give it a LS Engine Cover look, but be functional?

The pictured radiator isnt the LS Conversion Radiator and is a single core I had on hand, so the upper water neck is in the wrong location. That is what makes the mock up fabbed intake look too close. I also ran out of the Mock Up intake pieces, sure seems like they would give you more pieces, but you can get the idea..

I should have the 540 horse LS6 here at the beginning of next week, and I am running the Tremec TKO600 with the .82 final drive in 5th, and now I am debating on what rear end gear ratio to start with first.. The car will weigh in at about 2700 pounds, so I was thinking it would be useless to go any lower than 3:42's, but I was thinking of starting with 3:08's. This would be also be a decent posi-trac with 18x9.5 rear wheels, and I think it will still perform very strong there, while get about a 2000 rpm at about 70mph.