- VW MAF Sensor
- T25 5-star tamper resistant
- T25 6-star tamper resistant
You must be logged in to rate content!
3 minute read
Today we will show you how to replace your MAF sensor on the CHEAP! Watch the video or read the tutorial below. Enjoy!
Start by purchasing a Volkswagen MAF sensor, it has the same sensor as the BMW but different housing. Here is the part for reference:
Start by removing the MAF sensor from the VW housing. You will need a 5 star tamper resistant star bit set to move the screws holding in the sensor.
Actual bit size to remove the sensor is a T25
Unclip the stock sensor by pressing on the sides and pulling up.
BMW uses a 6-point tamper resistant torx bit.
Old vs. New:
Make sure the orientation of the MAF sensor is correct.
Plug it in.
Start your car, it usually takes a few minutes for everything to reset it self. Or use a OBD tool or disconnect your battery for 10 minutes to restart.