You must be logged in to rate content!
10 minute(s) of a 233 minute read
12-4-2010
300mm g60 discs from eurospecsport usa.The hydraulic handbrake are very efficient.Thanks kirsten for the nice "blinkers"
No money spent on my 200 years old garage.only the car.Later.....maybe. This old building was the home of my car for 12 years.
I have not weight my car yet,but i think i have the lightest rwd project. Ca about 850 kilos and 3-400 hp.
wishes for christmas: Engine management for the audi aeb engine.440cc fuel injectors.
12/12/2010
Sunday its a nice day to wash the car
Metalldust is covering the car. The trailer is to small
My plan is to use Electromotive tec gt engine management.
1/9/2011
Here is the picture of the waterpipes. Little progress in the project at this moment. My son was born 5th january!!! Proud. hoping to start the project again in a couple of a few weeks.
Here is a old picture from thel early rwd project . I wasnt satisfied with this sollution.
I started my old computer today.!!!
Here is picture from 2003 when i install the rieger widebodykit.
Back in the days:-)Year 2003.The new wheels from spain,only to fit this bodykit.et-10 in front,et-35 rear
1/16/2011
Today i got the vacuumstation delivered
Today i ordered a complete engine management included 5"trigger wheel,I also ordered 440cc injectors ,H&R swaybar in front.
The money in my pocket is burnin
11/25/2011
Today i do some drawings of my custom fueltank in alloy.Im gonna place the fueltank almost where the stock tank was mounted.26 litres if im not wrong.
2/5/2011
Today i started the project again. At last the problem with the gear linkage is solved .I put 2 small ballbearings instead of the stock for the reverse. Yes there are 6 speed
Also the throttle wire and new ballbearings on the trottle.
New stuff:
440 injectors
H&R Swaybar in front
Fueltank in alloy (still in production)
4 dtm exhaustpipes(Custom)
To Do
Adjust the camber/caster rear
Water and oil lines for the turbo
Brackets to support the turbo and manifoil
New brackets for the seats(lower)
Finnish pipes for radiator.
fuelline
Nice with some progress.Ill try to take some pictures tomorrow
2/6/2011
2months work to finnish the rollercage back in 2003:
2/7/2011
Today i worked on the exhaustsystem.All the exhaust pipes is gonna be covered by exhaust bandage because of the heat. Its no necessary with stainless steel pipes.
2/9/2011
Today: Wrong tps sensor , problem with trottle wire,Exhaust is finnish.
Oil feed to gt 28 rs is not the same as stock turbo oil feed.
Fueltank is mounted
Waterpipes must rebuilds because of the fueltank. I work 10 hours a day on the car right now.
I will take a few pictures tomorrow.
2/11/2011
The fueltank i ordered from a company in England,Nice welding
And finnally i find a good sollution for gaswire.After one week of thinkingand some tryings
Dtm Exhaust is finnish
Today i also get the engine management delivered from usa.
New brackets on passenger seat:
I need help to find the type of spark plug leads i must use for electromotive coils?? Anyone?.
My first
epic!
Posted by CCmyVW on 1/26/20 @ 4:46:18 PM