You must be logged in to rate content!
6 minute(s) of a 233 minute read
11-9-2010
Scirocco GTO Mid-engine
Compliments of garasja @ www.vwvortex.com
Scirocco TSR-RWD
project start.
90% thinking
ten hours working day
more welding
New metall
testing 02a 6-speed tranny with slip dif
New top mounts from golf 2
1,8t aeb engine and tranny innside:-)
driver side almost finnish
More new metal after 35 years
and welding....
many hours ..2 gas bottles and 1 weldthread
almost finnish (driver side)
g60 wheel hub
engine innside for....th time.
The bosch angle grinder needs new brushes
yeah! i can see the finnish line soon!
More metal porn
11/9/2010
subframe ready for painting
After 3 weeks 10 hour day.
rear driver side
I own this car since 1994.1999-2004 Installing the rieger kit,new paint and rollercage.I started rwd project oct 2010
Almost five years took it to finnish the rieger and rollercage mounting.1999 to 2004(2 old house project also).here with the 1,8 gti engine.
Pictures from 2006 i think 1,8 gti with t03 turbo
And today the steering
11/10/2010
After 3 weeks 10 hours day,the engine is inside!!! yeah!
What a f... No engine in front? hm
blueprint for the intercooler. anyone with a good idea?
up and down controlled with a switch of course
11/11/2010
Today i started the wiring loom for the engine,and the rearbrakes are mounted.
Comments
This is an excellent build story! Again, kudos a job well told and done!
Posted by Diggymart on 9/16/19 @ 12:47:16 PM
Nice!
Posted by Diggymart on 4/18/19 @ 3:20:45 PM
epic!
Posted by CCmyVW on 1/26/20 @ 4:46:18 PM