1988 scirocco project (shortened bumpers too) by JonnyPhenomenon

3 minute(s) of a 386 minute read

okay. lets try this again shall we?

here is the top view of the light cover and plug.

here is another one, and if you look close you will see that there is a ton of crap in the way that will stop you from using your old wire plug on it.

heres another one showing the crap that is in the way. you will need to clip your harness and crimp on a couple female spade connector ends on the wires to hook up to this.

removing the cover shows how the bulb hooks up. it has one wire coming off of it with a female spade connector, and it plugs into a male spade connector inside the cover. the brown(ground) wire comes from the cover and plugs onto the spade tab on the actual lamp housing.

here you can see the ground plug removed and my finger pointing at the ground tab.

and here is the housing with the lamp removed.

the lamp itself has the one positive lead coming off it, and the metal frame acts as its ground. 

heres a pic of me eating a teriyaki steak 

was that helpful?  

these just arrived 

got a couple of the rims all sanded down. just gotta fill in a couple dings and then I can send them to paint.