1988 scirocco project (shortened bumpers too) by JonnyPhenomenon

3 minute(s) of a 386 minute read

I really like how they came out. there was certainly a bit more to the mod than just pulling them in and stuff. I had to fill in the tow hook holes that normally would stick out like a sore thumb, and full in the cavity in the side skirts as well. 

if I do it again, I will change a few things, and take more time on others.. 

everything below the black line will show under the tucked NA bumpers. and with the tow hooks cut off, they look really ugly.

so we filled it. stuck a peice of cardboard to the back of it and filled it with epoxy bumper repair. very flexible stuff 

same thing for the front

then the rear corner

completely filled in.

I should have formed a smaller pocket for the bumpoer, as right now the bumper overlaps a little bit and it might rub against the surface there. 

I also should have done the same thing for the front, because the cavity in the front is still ugly and I overloooked it in my haste...

hanks man 

couple more pics

have I posted these before?

done 

look man, no toe hook holes 

thanks man. I keep looking at it, and I cant beleive that is actually MY car. 

got a bunch of stuff in from worldimpex today, so Ive been in and out installing all the little extra bits here and there.

I put in a chrome grill emblem today. some people like the black ones, or even badgeless, I on the other hand like a nice chrome vw emblem on my grill