Project Fredybender V2.1 : NA with an attitude for the track by fredybender

3 minute(s) of a 234 minute read

Painted & shaved valve cover installed, and I also finished machining all the components for my "distributor delete" I just got my clutch assembly back from balancing 

That idea is probably better, for having a perfectly balanced assembly, but on what part of the assembly (axial) would you remove the weight? As far as with the pulleys, its not a bad idea, but its the first time I hear about his, and to top it off, I don't even know which pulleys I will be using, as I need to find a small alternator, and machine some brackets... 

But taking everything in consideration, I have the following balanced individually, so the assembly of its parts, should be well within acceptable tolerances

Pistons (0.1g) 

Con rods (0.1g) 

Crank (no spec from crank place, but very competent) 

Clutch assembly (0.3g)

12-19-10

Roll cage is finished; 17 hours on Saturday, and about 10 today...

Not a full 17 hours, as I attended a friends funeral from 9-12...